In Stock

Powerful Dual LTE Cat 6 router is designed for mission critical applications. Two simultaneously operational LTE CAT 6 modems can provide speeds up to 600 Mbps with load balancing feature. This makes this device irreplaceable in applications where losing connection is not an option.Learn more on wiki page

In stock

Sku:RUTX12

$715.00 inc. GST

Request a Quote

In stock

Compare

Throughout the years, more and more applications and solutions require more bandwidth; therefore, networking devices have to be able to evolve together with changing demands of IoT and enterprise markets. Besides, there are limited options when it comes to providing powerful, reliable, and fast connectivity to the Internet for your equipment and solutions when they are based in remote locations. So, what can you do? All these questions and doubts can be answered by Teltonika Networks newest enterprise cellular router– the RUTX12! This device is designed for solutions where throughput and uninterruptible connectivity is a must.

Introducing the RUTX12

Dual LTE with Load Balancing
The RUTX12 has two independent 4G LTE CAT6 mobile modems working with 2 SIM cards to provide redundancy and maximize connection availability with advanced network security features. When the two modems are working simultaneously, the router can reach the throughput of up to 600 Mbps with load balancing. When this feature is enabled, the traffic is distributed across a number of connections, which remain separate. Load balancing supports open standards such as IPSec when setting up VPNs. While the VPN itself will only run on one active channel at a time, it can be set to auto-failover between channels should the link fail. Load balancing functionality lets you split the traffic according to different priorities and security levels. Furthermore, the RUTX12 can send or receive SMS to one of the SIM cards while the other SIM card can be dedicated to providing only data services. This functionality enables flexibility and cost-effectiveness to your solution having all of that functionality in a single device. This is especially appealing to situations when you need to split data traffic into two streams with the two mobile modems so that your corporate data would go through one of the modems, while other data would travel through the secondary modem to comply with high-security standards and avoid interference.

Introducing the RUTX12

RUTX12 Connectivity Options
RUTX12 is equipped with multiple interfaces, including 5 Gigabit Ethernet ports, USB 2.0, Global Navigation Satellite System and I/O. In addition, Bluetooth Low Energy 4.0 allows users to pair the RUTX12 with sensors of all types, shapes, and sizes that give read-out information, show status, or can be used to build complex and innovative IoT solutions. These include, but are not limited to, environmental condition monitoring, access control, time management in a workplace, indoor tracking, and asset management. RUTX12 router can be paired with many different sensors at the same time, for example, this device can work with up to 200 Blue Coin sensors that can be found in our Accessories Section. The RUTX12 offers robust wireless service with Dual Band 2.4 GHz N & 5 GHz AC WiFi that provides flexibility to split traffic for better security and solution effectiveness while enjoying fast wireless data connection. The Global Navigation System Support, more commonly referred to as GPS, enables to track the location of the router, apply geofencing rules or can be used for time synchronization. Location services make it even easier to manage the fleet of RUTX12s in our Remote Management System (RMS)

Introducing the RUTX12

Software and Remote Management
The RUTX12 has the same software as all other routers & gateways by Teltonika Networks – the RutOS. This system is regarded by our device users across the globe as one of the most important reasons for choosing our connectivity solutions and networking equipment. However, having to manage two LTE modems simultaneously comes with additional RutOS features developed especially for the RUTX12. Overall, you can expect to find the full RutOS functionality with VLANs, location services, industrial, remote service protocol support, and advanced security features like firewall & support for multiple VPN services. Finally, RutOS provides seamless integration with third-party applications, cloud, management platforms, and captive portal management tools.

RUTX12, like all other routers and gateways from Teltonika Networks, is compatible with Remote Management System (RMS) – IoT platform. You can conveniently upgrade routers configuration and firmware, set alerts, get notifications, and manage your whole fleet of routers with ease. Also, with RMS you can update your device firmware with a couple clicks of a button regardless of how many devices you want to upgrade. You can check all the capabilities of Teltonika Networks RMS. Also, with each supported device, you can test the platform yourselves with a free 30-day trial. To learn more about how can, RMS can help build your next IoT solution, contact your Teltonika Networks manager or take a look at a recording of a recent webinar about this subject.

Introducing the RUTX12

Use Case – Boat and Yacht Connectivity
In Today’s life all type of transportation vehicles, such as police cars, ambulance vehicles, taxis or even cranes on the port or at the construction site, has to have reliable cellular internet connectivity. Boats and yachts are no different from other transportation, but for operations, marketing, and service quality, these vessels need a robust and easy to use solution for reliable Internet access.

Introducing the RUTX12

Use Case – Uninterrupted Retail Connectivity
Retail market is highly dependent on reliable, fact and secure internet connectivity. In the heart of the cities it’s quite easy to have reliable landline connectivity, but for companies, who manages shops in areas where internet connectivity is unstable and very slow or even unreachable, it’s crucial to pick the “right” devices for the job. Check out how to ensure reliable connectivity for retail businesses with powerful RUTX12.

Finally, The RUTX12 is designed and tested to meet the requirements of industrial, mobile, security, and other harsh environment applications where standard commercial designs fail. Specifications include wide operating temperature ranges from -40 to +75 °C, input voltage range 9 VDC to 50 VDC, and rugged aluminium housing compatible with Din Rail and surface mounting options.

Features

MOBILE
Mobile module 2 x 4G (LTE) – Cat 6 up to 300 Mbps, 3G – up to 42 Mbps
SIM/mobile module switch 2 SIM cards, one for each mobile module, auto switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail, SIM idle protection (planned)
Status Signal strength, SINR, RSRP, RSRQ, Bytes sent/received, Mobile module in use
SMS SMS status, SMS configuration, send/read SMS via HTTP POST/GET, Email to SMS, SMS to Email, SMS to TTP, SMS to SMS, SMS auto replay, scheduled SMS (planned), SMPP (planned)
Black/White list Operator black/white list
Multiple PDN (planed) Possibility to use different PDNs for multiple network access and services
Band management Band lock, Used band status display
APN Auto APN
Bridge mode Direct connection (bridge) between mobile ISP and device on LAN
WIRELESS
Wireless mode 802.11b/g/n/ac (WiFi 5) with data transmission rates up to 867 Mbps (Dual Band, MU-MIMO), 802.11r fast transition, Access Point (AP), Station (STA)
WiFi security WPA2-Enterprise-PEAP, WPA2-PSK, WPA-PSK, WEP; AES-CCMP, TKIP, Auto Cipher modes, client separation
ESSID ESSID stealth mode
Wireless Hotspot Captive portal (Hotspot), internal/external Radius server, built in customizable landing page
ETHERNET
WAN WAN port (can be configured as LAN) 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover
LAN 4 x LAN ports, 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX
BLUETOOTH
Bluetooth 4.0 Bluetooth low energy (LE) for short range communication
NETWORK
Routing Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP)
NetSnapper (optional) Mobile connection management, data compression VPN client (not available in standard FW)
Network protocols TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet client, SNMP, MQTT, Wake on LAN (WOL)
VoIP passthrough support H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets
Connection monitoring Ping Reboot, Wget reboot, Periodic Reboot, LCP and ICMP for link inspection
Firewall Port forwards, traffic rules, custom rules
DHCP Static and dynamic IP allocation, DHCP Relay, Relayd
QoS Traffic priority queuing by source/destination (planned), service (planned), protocol or port (planned), WMM, 802.11e
DDNS Supported >25 service providers, others can be configured manually
Network backup VRRP, Mobile, Wired and WiFi WAN options, each of which can be used as an automatic Failover
Load balancing Balance Internet traffic over multiple WAN connections
SSHFS (optional) Possibility to mount remote file system via SSH protocol (not available in standard FW)
SECURITY
Authetication Pre-shared key, digital certificates, X.509 certificates
Firewall Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T
Attack prevention DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
VLAN Port based and tag based VLAN separation
Mobile quota control Custom data limits for both SIM cards
WEB filter Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only
Access control Flexible access control of TCP, UDP, ICMP packets, MAC address filter
VPN
OpenVPN Multiple clients and a server can run simultaneously, 12 encryption methods
OpenVPN Encryption DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC
IPsec IKEv1, IKEv2, with 5 encryption methods for IPsec (DES, 3DES, AES128, AES192, AES256)
GRE GRE tunnel
PPTP, L2TP Client/Server instances can run simultaneously
Stunnel Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code
DMVPN Method of building scalable IPsec VPNs
SSTP SSTP client instance support
MODBUS
Modbus TCP slave ID filtering: Respond to one ID in range [1;255] or any
Allow remote access: Allow access through WAN
Custom registers: Modbus TCP custom register block, which allows to read/write to a file inside the router, and can be used to extend Modbus TCP slave functionality
Modbus TCP master Supported functions: 01, 02, 03, 04, 05, 06, 15, 16
Supported data formats: 8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC)
MQTT gateway Gateway Allows sending commands and receiving data from Modbus Master trough MQTT broker
Modbus data to server Protocols HTTP(S), MQTT, Azure MQTT (planned)
MONITORING & MANAGEMENT
WEB UI HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, event log, system log, kernel log
FOTA Firmware update from server, automatic notification
SSH SSH (v1, v2)
SMS SMS status, SMS configuration, send/read SMS via HTTP POST/GET
CALL Reboot, Status, Mobile data on/off, Output on/off
TR-069 OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem
MQTT MQTT Broker, MQTT publisher
SNMP SNMP (v1, v2, v3), SNMP trap
JSON-RPC Management API over HTTP/HTTPS
Modbus Modbus TCP status/control
RMS Teltonika Remote Management System (RMS)
IoT PLATFORMS
Clouds of things Allows monitoring of: Device data, Mobile data, Network info, Availability
ThingWorx Allows monitoring of: WAN Type, WAN IP Mobile Operator Name, Mobile Signal Strength, Mobile Network Type
Cumulocity Allows monitoring of: Device Model, Revision and Serial Number, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength, WAN Type and IP
Azure IoT Hub Can send device IP, Number of bytes send/received/ 3G connection state, Network link state, IMEI, ICCID, Model, Manufacturer, Serial, Revision, IMSI, Sim State, PIN state, GSM signal, WCDMA RSCP, WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, Operator, Operator number, Connection type, Temperature, PIN count to Azure IoT Hub server
SYSTEM CHARACTERISTICS
CPU Quad-core ARM Cortex A7, 717 MHz
RAM 256 MB, DDR3
FLASH memory 256 MB Flash
FIRMWARE / CONFIGURATION
WEB UI Update FW from file, check FW on server, configuration profiles, configuration backup
FOTA Update FW/configuration from server
RMS Update FW/configuration for multiple devices at once
Keep settings Update FW without losing current configuration
FIRMWARE CUSTOMIZATION
Operating system RutOS (OpenWrt based Linux OS)
Supported languages Busybox shell, Lua, C, C++
Development tools SDK package with build environment provided
LOCATION TRACKING
GNSS GPS, GLONASS, BeiDou, Galileo and QZSS
Coordinates GNSS coordinates via WebUI, SMS, TAVL, RMS
NMEA NMEA 0183
Server software Supported server software: TAVL, RMS
Mobile Network Geolocation Get approximate device location on RMS based on mobile cell tower position (without using GPS)
Geofencing Configurable multiple geofence zones
USB
Data rate USB 2.0
Applications Samba share, custom scripts (planned)
External devices Possibility to connect external HDD, flash drive, additional modem, printer (planned)
Storage formats FAT, FAT32, NTFS
INPUT/OUTPUT
Input 1x Digital Input
Output 1x Digital Output
Events SMS, Email, RMS
POWER
Connector 4 pin industrial DC power socket
Input voltage range 9 – 50 VDC, reverse polarity protection, voltage surge/transient protection
PoE (passive) Passive PoE. Possibility to power up through LAN1 port, not compatible with IEEE802.3af and 802.3at standards
Power consumption Idle: <4 W, Max: <22 W
PHYSICAL INTERFACES (PORTS, LEDS, ANTENNAS, BUTTONS, SIM)
Ethernet 5 x RJ45 ports, 10/100/1000 Mbps
I/Os 1 Digital Input, 1 Digital Output on 4 pin power connector
Status LEDs 6 x connection status LEDs, 6 x connection strength LEDs, 10 x Ethernet port status LEDs, 4 x WAN status LEDs, 1x Power LED, 2.4G and 5G WiFi LEDs
SIM 2 x SIM slots (Mini SIM – 2FF), 1.8 V/3 V, external SIM holders
Power 4 pin DC connector
Antennas 4 x SMA for LTE, 2 x RP-SMA for WiFi, 1 x RP-SMA for Bluetooth, 1 x SMA for GNNS
USB USB A port for external devices
Reset Reboot/User default reset/Factory reset button
PHYSICAL SPECIFICATION
Casing material Full aluminium housing
Dimensions (W x H x D) 132 x 44 x 95 mm
Weight 540 g
Mounting options DIN rail (can be mounted on two sides), flat surface placement
OPERATING ENVIRONMENT
Operating temperature -40 C to 75 C
Operating humidity 10 % to 90 % non-condensing

Downloads

RUTX12 DATASHEET (EN)

Updated 2020-06-03

RUTX12 QUICK START GUIDE (EN)

Updated 2020-06-03

Back to Top